this video will show you how to program the keyless remote on 1996 Oldsmobile Aurora .
keyless entry remote part number
GM / UTA 25678792
FCC ID: KOBUT1BT
CANADA: 1983 101 393
OLDSMOBILE KEYLESS REMOTE.
This video will show you how to program your keyless entry remote fob on 1996 Oldsmobile Aurora part number GM /UTA 25678792 FCC ID: KOBUT1BT .
To program this Oldsmobile keyless remote it takes about 1 min of your time.
Oldsmobile keyless remote programming instructions will not only work on Oldsmobile but should also work on most GM cars.
OLDSMOBILE KEYLESS REMOTE programming instructions.
1 Grab a paper clip and untangle it so you can short the OBD pins. ( see video how )
2 Key out of ignition.
3 Get under the drivers side dash and locate the DLC. ( OBD plug )
4 Short out pin #4 and pin #8 togather. ( see image bellow to see what pins )
5 Put the ignition on.
6 Push LOCK and UNLOCK on the Oldsmobile keyless remote and hold for about 30 seconds.
7 When you hear the car lock the doors let go of the lock and unlock buttons on the Oldsmobile keyless remote.
8 Turn the ignition off
9 Remove the paper clip from the OBD port.
10 Test you Oldsmobile keyless remote.
Duration : 0:2:59
Technorati Tags: aurora, key fob, key less, Keyless Entry, keyless remote, Oldsmobile, remote control
No comments:
Post a Comment